On the Docket

Looking forward to trying my hand at some quarter and rift sawing this weekend courtesy of the trusty LT-15 and this fine batch of Cherry logs.

img_7215

And here’s a great infographic from Wood-Mizer on the process:

img_7227

Advertisements

Simple Pleasures

Late last summer I milled a decent sized walnut trunk into 2″ planks, plainsawn through and through on the LT15. The rest of the slabs are closer to 6′ long but a couple came out closer to 2′ for various reasons. The slabs were air drying for about 9 months which isn’t nearly long enough for 2″ thick walnut but since we don’t have the solar kiln set up yet I thought I’d try my luck at “kiln” drying in the attic.

I wasn’t properly prepared for this in that I don’t have a thermometer up there to measure temp/humidity but if I had to guess I’d say it’s around 110 up there during the day at least during the last few months that I’ve had the wood up there. MC was around 20% when the wood went in and today the reading was closer to 7-8%. Not too bad. It was definitely a lot easier hauling the pieces down.

I need 4 legs for a small hall bench I’m building out of an old walnut slab and thought this chunk would work nicely for that.
DSCF9807

After crossing cutting the ends to get it to length (approx. 17″) I ripped one edge to get rid of the last gnarly bit. The off-cut was kind of cool, with the insect damage so I set that aside to use at some point down the road maybe as a decorative piece.

DSCF9808

Once cut to size I brought out the trusty Jack Plane and started cross planing to flatten the first side. Always a treat to plane off the sawmill marks and see the grain and figure appear. Never gets old.

DSCF9809

And after about 2 hours of handwork I had a lovely 2″ thick 14″x17″ chunk of walnut from a tree more or less in my own backyard. There’s some nice chatoyance when the light hits it right and I’m looking forward to ripping the 4 legs for the hall bench in the next couple days. For now, I’ll let the wood rest and see what kind of movement occurs before proceeding.

DSCF9814

DSCF9817